The RF coaxial surge protector, also commonly referred to as an RF lightning arrester, serves as an indispensable protective part for steady operation within contemporary communication systems.It is installed in series along the signal path between antennas and receiving devices like base stations and satellite receivers. Engineered professionally, this device is built to release transient overvoltage and surge current generated by lightning surges or grid instability on transmission lines.It rapidly conducts dangerous surge energy to the ground in nanoseconds, delivering reliable safeguarding for high-value, precision-sensitive electronic devices at the backend and preventing irreversible equipment damage.By reducing unexpected network outages and economic losses resulting from lightning impacts, this series becomes a must-have solution for constructing high-stability outdoor communication network infrastructure.
A full selection of connector styles and port combinations is available to meet diverse on-site installation demands:
Interface Specifications: N-Type, TNC, SMA, BNC, UHF, DIN 7/16.
Structural Configurations: Male to Female, Male to Male, Female to Female, along with bulkhead mounting models for stable cabinet and panel installation.
Impedance Options: 50Ω and 75Ω two mainstream specifications, fully compatible with various communication system impedance standards.
| Parâmetro | Material | Chapeamento |
|---|---|---|
| Corpo | Latão | Revestimento de liga ternária |
| Isolador | PTFE | N / D |
| Pin de contato | Bronze Fósforo | Chapeamento de ouro |
| Porca de acoplamento | Latão | Niquelagem |
| Parâmetro | Conector 1 | Conector 2 |
|---|---|---|
| Tipo | BNC | BNC |
| Padrão | IEC 61169-8 | IEC 61169-8 |
| Impedância (Ohm) | 50 Ohm |
| DWV (ao nível do mar) | 2500V |
| Tensão de trabalho (ao nível do mar) | 1000V |
| Faixa de frequência (GHz) | DC-3GHz |
| ROE | <1.20 |
| Rated DC voltage | 230V |
| Ground wire diameter | ≤8 mm2 |
| Maximum impluse discharge current | 20kA |
| Parâmetro | BNC |
|---|---|
| Torque de porca de acoplamento recomendado | Bayonet |
| Torque de Prova de Acoplamento | N / D |
| Força de retenção da porca de acoplamento | ≥ 101 lbs |
| Cativação de contato-axial | ≥ 6.0 lbs |
| Durabilidade (acasalamento) | ≥ 500 |
| Faixa de temperatura | -40°C a +125°C |
| Choque Térmico | MIL-STD-202, Method 107, Condition B |
| Resistência à umidade | MIL-STD-202, Method 106 |
| Corrosão | MIL-STD-202, Method 101, Condition B |
| RoHS | Compliant |